WEKO3
アイテム
角正方形切断正方形平面回路の固有モードの計算 -モード対応多線条伝送線路等価回路に基づいて-
http://hdl.handle.net/10487/10055
http://hdl.handle.net/10487/1005533a73984-94a8-46bb-bc14-2439ff7030bd
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
|
Item type | 学術雑誌論文 / Journal Article(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2012-02-27 | |||||
タイトル | ||||||
タイトル | 角正方形切断正方形平面回路の固有モードの計算 -モード対応多線条伝送線路等価回路に基づいて- | |||||
言語 | ||||||
言語 | jpn | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | ストリップ線直角曲がり | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | 固有モード展開法 | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | フォスタ型等価回路 | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | 多線条伝送線路 | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Stripline right-angle bend | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Eigenmode expansion method | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Foster-type equivalent network | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Multi-transmission line | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | journal article | |||||
著者 |
平岡, 隆晴
× 平岡, 隆晴× Hiraoka, Takaharu× 田部井, 康× Tabei, Yasushi× 許, 瑞邦× Hsu, Jui-Pang |
|||||
抄録 | ||||||
内容記述タイプ | Abstract | |||||
内容記述 | ストリップ線/マイクロストリップ線直角曲がりを精度良くかつ合理的に解析する手法として、曲がり部を入出力平面導波路部と平面接合回路部に分割して、前者より多線条伝送線路等価回路が、後者よりフォスタ型等価回路が得られることが知られている。フォスタ型等価回路を求めるには、平面接合部の固有モード(固有値, 固有関数)を計算する必要がある。ここでは、正方形平面回路の角を正方形にカットした角正方形切断正方形平面回路を取り上げ、この平面回路を幅広・幅狭の導波路の結合と考えると、多線条伝送線路表示の多開口理想変圧器を介した等価回路が得られる。この等価回路に基づいて固有モードを計算したので、その結果を示す。 | |||||
抄録 | ||||||
内容記述タイプ | Abstract | |||||
内容記述 | In order to analyze stripline/microstrip line right-angle bend with arbitrary shape accurately and systematically, the corresponding right-angle bend section id divided into planar junction part and planar waveguide part. Equivalent network for each part can be given by modal analysis ; multi-transmission line network for the former and Foster-type equivalent network for the latter. In order to calculated circuit parameters of Foster-type equivalent network, eigenmode for planar junction part must be calculated. In this report, stripline right-angle bend with square-cut at the corner is investigated. The corresponding junction part can be understood as a connection of narrow and wide stripline, and then the equivalent network for this structure can be represented by multi-transmission line and multi-port ideal transformer. Based on this equivalent network representation, the corresponding matrix type eigenvalue problem is formulated and solved. | |||||
内容記述 | ||||||
内容記述タイプ | Other | |||||
内容記述 | MW98-106 rights: 社団法人電子情報通信学会 relation: isVersionOf:http://ci.nii.ac.jp/naid/110003189735 |
|||||
書誌情報 |
電子情報通信学会技術研究報告. MW, マイクロ波 巻 98, 号 327, p. 53-60, 発行日 1998-10-16 |
|||||
ISSN | ||||||
収録物識別子タイプ | ISSN | |||||
収録物識別子 | 0913-5685 | |||||
書誌レコードID | ||||||
収録物識別子タイプ | NCID | |||||
収録物識別子 | AN10013185 | |||||
著者版フラグ | ||||||
出版タイプ | VoR | |||||
出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||
その他の言語のタイトル | ||||||
その他のタイトル | Calculation of eigenmode for square-shaped planar circuit with corner square-cut -Based on multi-mode transmission line equivalent network- | |||||
出版者 | ||||||
出版者 | 電子情報通信学会 | |||||
資源タイプ | ||||||
内容記述タイプ | Other | |||||
内容記述 | Article |